Ge-industrial-solutions QS873A Thermal Probe Kit Manuel d'utilisateur télécharger pdf

Doc ID: CC848817445-MAN 1 OF 3 3/31/2008

Doc Type: General Manual 11:14:34 AM

Doc Issue: See change history above Lineage Power

Proprietary - Use Pursuant To Company Instructions

Title:

CC848817445: Instructions for QS873A Thermal Probe Expansion Kit

(For use with Kit CC109135027: 3EM21240AA)

Change History:

Name: Date: Revision:

Description Of Change

KAL 1/24/2007 1 INITIAL RELEASE

KAL 3/28/2007 2 REPLACE 848719811 WITH CC848822321 (RoHS EQUIVALENT)

PDS 3/31/08 3 Lineage Power Version

Required Tools:

Wrench required to loosen/tighten hardware on battery posts. The size of this wrench is dictated by the batteries.

Procedure:

1. Verify all material is in kit.

Qty 1 108987611 QS873A Thermal Probe Assembly

Qty 1

CC848822321 Wireset (Pre-attached to

Thermal Probe)

Qty 1 402244081 Cable Tie (Attached)

Qty 2 848715074 Case (1 Attached & 1 Loose Spare)

2. Select the last thermal probe in the existing thermal probe daisy chain. This is the probe where the Thermal Probe Expansion

Kit will connect. If this existing probe can be disconnected from its battery during installation of the expansion kit, this will

make the process easier.

3. On the existing thermal probe, cut the cable tie (strain relief) and open the case (if case is damaged during opening, a spare is

provided in the expansion kit). Do not unplug existing wireset. See Figure 1.

FIGURE 1: Opening Thermal Probe Case

1 2 3

Doc ID: CC848817445-MAN 1 OF 3 3/31/2008 Doc Type: General Manual 11:14:34 AM Doc Issue: See change history above Lineage Pow

Page 2

Doc ID: CC848817445-MAN 2 OF 3 3/31/2008 Doc Type: General Manual 11:14:34 AM Doc Issue: See change history above Lineage Pow

Page 3

Doc ID: CC848817445-MAN 3 OF 3 3/31/2008 Doc Type: General Manual 11:14:34 AM Doc Issue: See change history above Lineage Pow

Pas de commentaire

Ge-industrial-solutions QS873A Thermal Probe Kit Manuel d'utilisateur