Ge-industrial-solutions EntelliGuard G Kirk Keylock Kit Manuel d'utilisateur télécharger pdf

DEH-41500 Installation Instructions

EntelliGuard G

Circuit Breaker

Accessories- Kirk Keylock Kit

Introduction

Kirk Keylock Kit

The cassette mounted keylock is an optional

accessory, which will keep the breaker in the

trip free state and prevents access to the

racking mechanism while locked. A maximum

of 2 keylocks can be used. The kit supplies the

cam and installation instructions for the

cassette. Order 2 kits if 2 locks are to be

installed. The keylocks must be ordered

separately from Kirk Key. Ordering instructions

can be found in figure 5 later in this document.

Catalog Number:

Catalog Number Description

GCKRKR Kirk Keylock Kit (1 lock)

Installation into cassette:

1. Remove the appropriate knockout feature in

the cassette. Remove the left knockout for 1

lock and both knockouts for 2 locks. Remove

the rough edges.

2. Insert the lock body partially into the front

cavity. Slide setscrew ring onto rear of lock

body. Before fully seating lock into cassette,

slide cam onto rear of keylock. See figures 2

and 3 to identify correct cam orientation. Apply

finger pressure to hold the setscrew ring tight

against cassette inside wall. Tighten both

setscrews (7-10 In-Lb) to hold the lock tightly

into cassette.

3. Locate “X” on cam towards front of cassette

for “E” type locks (see Figure 3).

4. Locate “X” on cam towards rear of cassette

for “W” type locks (see Figure 3).

“E” is for extended version locks. The key is

removable when the key is rotated

counterclockwise to the left.

“W” is for for withdrawn version locks. The key is

removable when the key is rotated clockwise to

the right.

Left keylock location

(1 or 2 locks)

W or E type locks

Right keylock location

(2 locks only)

E type lock only

ure 1

lock Cam

Setscrew Ring

ure 2

Cam Front View

“E” Lock

Cam Rear View

“W” Lock

ure 3

1 2

Résumé du contenu

Page 1 - Accessories- Kirk Keylock Kit

1 DEH-41500 Installation Instructions EntelliGuard G® Circuit Breaker Accessories- Kirk Keylock Kit Introduction Kirk Keylock Kit The cassette

Page 2 - Removable

2 Keylock Operation When operating the keylocks, turn both keys quickly from one position to the other and remove the key quickly at the end of the

Commentaires sur ces manuels

Pas de commentaire

Ge-industrial-solutions EntelliGuard G Kirk Keylock Kit Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Ge-industrial-solutions EntelliGuard G Kirk Keylock Kit. GE Industrial Solutions EntelliGuard G Kirk Keylock Kit User Manual [en] [de] [fr] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Ge-industrial-solutions EntelliGuard G Kirk Keylock Kit